Diamond Nanotechnology

03/12/2022

03/12/2022

10/08/2021

Sensors explained

AEM SS MAP sensors: https://bit.ly/d4a-map-sensorsAEM wideband: http://bit.ly/D4AxserieswbAEM IAT: https://bit.ly/D4A-iat-sensorsAEM FLUID TEMP: https://bit....

21/07/2021

Wizard Tip part 2!

The CAR WIZARD 🧙‍♂️ shares another 10 tips he’s developed from his 20+ years of working on cars. These tips are geared more for the advanced mechanic, but s...

21/07/2021

Essential mechanic tips! Part 1

The CAR WIZARD 🧙‍♂️ shares 10 tips he’s developed from his 20+ years of working on cars.🔮🔧 AMAZON AFFILIATE STORE: https://www.amazon.com/shop/omegaautocl...

29/01/2021

XADO Smart Nanotechnology

XADO

29/01/2021

XADO AMC TwinTurbo engine wear protection. The right choice when it comes to the wear protection of internal combustion engines with an oil volume 3 to 10L.
Do you need that? Unfortunately, there is still the misconception that "good oil" and "short" change intervals are sufficient for the longest possible engine life. Shorter oil change intervals are good, but even the best engine oil is unable to stop the inexorable process of friction wear. Already from the first starting of the engine the wear begins by abrasion while the metal surfaces rub against each other.
The XADO AMC Revitalizant, which is highly concentrated in our AMC TwinTurbo product, rebuilds worn metal surfaces by forming a metal-ceramic surface layer. The formation of this metal-ceramic surface layer is a physico-chemical process in which special silicate atoms combine with the metal atoms of the friction surfaces to create a completely new surface. Not only is this new metal-ceramic surface harder than the original metal alloy of the engine parts, it also has significantly less roughness resulting in less wear and lower working temperatures.
The build-up process of the metal-ceramic surface layer takes place only at the places where high temperatures and pressures occur due to friction.

Welcome to XADO USA - one of the largest manufacturers of innovative car care products and lubricants. XADO products are designed for restoration and repair...

25/01/2021

Symptoms of a bad fuel pump. Don’t let it happen to your car!
For Repair, Protection and restoration of fuel pump try this product!
Revitalizant EX120 for Fuel Equipment
Reinforced revitalizant.
* Restores geometry and protects the friction parts of fuel pumps of all types, jets and pump-injector units against wear
* Reliably protects from low-quality fuel
* Reduces fuel consumption
* Decreases noise and vibration level
* Decreases the level of toxic components in the exhaust gases

The product is designed to protect from wear and to provide restoring repair of all types of fuel equipment of gasoline and diesel engines.
Due to its by 20% greater* active agent’s concentration, it offers strong restoration potential to the worn out surfaces and wear protection.
* compared to XADO gel-revitalizant for fuel equipment. During the treatment of fuel pumps the product forms a metal-ceramic coating on the surfaces of the friction metal parts. As a result, the geometry of all parts is restored.
Revitalizant is universal for all types of fuel systems, including K-KE-L-Jetronic, Common Rail, Pumpe Düse etc.
The dosage depends on the oil system capacity.

Application instructions:
Treatment of engine fuel equipment with capacity of up to 5 L
1. Press out the content of the syringe into a fuel tank with minimal fuel content
2. Fill the tank with 40 L of fuel
3. Run the car in normal mode
4. The treatment is considered complete after about 100 hours of the mechanism operation (approx. 1850 miles of run)
Dosage:
Engine capacity, L 0-5 5-15 15-30
Number of syringes (8 ml), pcs 1 2 3
Treatment procedure single single single
Note:
It is recommended to clean the engine fuel system before application of the product. Other (non-standard) filtering devices may reduce the revitalization effect.
Package
Syringe, 8 ml XA 10033

Support this channel www.patreon.com/top5autorepairs This video is for the following repairs:Signs of a bad fuel pump,Symptoms of a bad fuel pump,How to tell...

25/01/2021

A comparison between Petrol (Gasoline) Engine vs. Diesel Engine, How it works?

Help us to make future videos for you. Make LE's efforts sustainable. Please support us at Patreon.com ! https://www.patreon.com/LearnEngineering Have you ev...

25/01/2021

XADO Luxury Drive Synthetic Oils
For Money and Time Savings

It is Cost effective!
Revitalizant extends and protects engine with one treatment.

Savings!
* Reduction of fuel consumption.
* No expenses on overhaul repairs.
* No loses resulting from equipment downtime.
* Extended service life. Increase in engine compression and power.
* Ecological rationality. Reduction of toxic emissions to the atmosphere.

24/01/2021

Daikin Aircon Service Center
Dasmariñas, Cavite Branch
THANK YOU FOR TRUSTING XADO SMART NANOTECHNOLOGY!!!

Vehicles to be treated:
Nissan Frontier 2009 SUV, Isuzu elf Service Truck, Mitsubishi L300 Service Van

“The owner is more concern on their service vehicle mobility and can’t afford downtime to service their air-con clients, Now that their business is picking up and more customers are asking for AC maintenance/cleaning.”

Vehicle Problem:
Strong engine vibration and emitting black smoke! Result of Loss of engine power, compression reduction, and increased fuel consumption.

Treatment procedure:

Before treatment: Cleaning/flushing
XADO VitaFlush intensive cleaner together with Verylube Turbo Carbon-60.

During treatment: Run/drive 1,000km
After 1,000km run, changed the old oil and replaced air filter and oil filter. Add new oil using XADO Atomic Metal Conditioner Synthetic Oil 10W-40 Luxury Drive “Black Edition”. Use XADO AMC Twin Turbo on the Nissan Frontier 2009 together with VeryLube Turbo Carbon-60.

After treatment: Revitalized
There is less vibration on the engine, less black smoke, there is an improvement on mileage for an additional 1km/liter initially. Increased in power.

Note:
The XADO Smart Nanotechnology Ceramic Metal/Atomic Metal Conditioner products is designed for protection, restoration and repairs of any types of vehicle and mechanisms without disassembling and overhauling.